|PG/60-2- HEART TRANSPLANT
Do you own a Red Colored Floor Stripper?
Is it noisy? Does it vibrate a lot? Does it have
to be greased every day? Does it take three hands to change blades? Do
you have a lot of maintenance?
Whatever... don't junk it!
Rejuvenate your old, noisy, worn out, red Senior Floor Stripper
for a fraction of the cost of a new PG101-G Palmer Floor Stripper.
When you purchase a PG60 front end assembly you will receive,
free, an accessory conversion kit that will help you make
your old stripper operate and sound like the new "QUIET ONE".
(less than 84db)
WE HAVE THE SOLUTION!
Your free Conversion Kit includes blueprints and
instructions for easy assembly and installation in converting your old
red floor stripper into a "QUIET ONE".
Also Included are:
Longer pivot shaft, bolt & nut,
two collars and 1/8" allen wrench. Belt guard plate, screws and bracket.
Stud kit for securing weight. Two saber saw blades, tapping bit, and drill
bits. A can of gray spray paint. Wheel axle. Axle tube and a complete set
The reason why our PG101-2 Senior Floor Stripper
is superior to all other floor strippers is in the precision, thought and
care put into each part of our PG60-1 which is of course the "heart" of
||PART NO. 10-PG
NEW [ASSEMBLED] CONNECTING ROD WILL LAST A LIFETIME
It is made of heavy thick steel tubing and bar stock
machined so that one can remove and replace new bearings and grease seals.
The four OILITE BUSHINGS are impregnated with oil
during manufacturing and they provide lifetime lubrication in applications
even where proper lubrication maintenance is uncertain, difficult, or sometimes
||PART NO. 17-PG
NEW ECCENTRIC CAM SHAFT WILL LAST A LIFETIME AND
The shafts are of high grade hard steel, cut to length
machined and ground to micro finish and sized to fit component part No.
10-PG that has everlasting OILITE BUSHINGS.
Surplus material is machined away between the bushing
surfaces to allow more grease storage. The curvature cut is designed to
force grease into the bushings, thereby increasing their life. By reducing
the weight of the shaft, the eccentric force is minimized, thus there is
less bushing wear and vibration.
NEW IMPROVED STRIKER FOOT CASTING
This is one more example of our aim to save you maintenance
NO. 1: The casting is made of a special
alloy which is then heat treated for hardness which assures
longer wear service.
NO 2: The support surface for the pivot
shaft is many times wider, again less replacement costs. Has
NO. 3: The body for component parts Nos.
14-PG & 22-PG is wider, which means longer service time.
NO. 4: All holes are first drilled then
hand reamed for a close fit for its component parts, again
longer service time.
The 54PG Improved Blade Safety Kit gives
you the safest method of blade changing ever devised. Correct blade placement
every time. Only 2 nuts to tighten completely away from the blade. Simply
order your Stripper & assemblies by adding "-1" to the model number.
The 54PG becomes a permanent part of the No. 11PG striker foot casting.
NOW 8 WAYS TO ORDER YOUR NO. 54PG
- PG/101-1 Senior Floor Stripper
- PG/60-1 Heart Transplant
- PG/250-1 Deluxe Base Assembly
- 6OPG-1 Front End Assembly
- 56PG 54PG Installed to 11 PG Striker Foot Casting ***NEEDED
IF YOUR EXISTING STRIKER FOOT CASTING IS NOT RECESSED***
23PG Pivot Shaft Tube is also included.
- Starter Kit-1 (W/54PG installed in Stripper to become
- Fixer-Upper Kit-1 (W/54PG installed in Heart Transplant
to become PG/60-1)
- 54PG Blade Safety Assembly Kit - Can be ordered separately.
As an Introductory Offer, when you purchase
a 54PG Blade Changing Assembly you will receive free: a Mini Blade Package
No. 2, featuring sample blades of various sizes including the new No. 40-7"
x 3" steel blade. we recommend this blade in place of the 6" x 3" blade
for use with the 54PG. In fact, the 54PG was the inspiration for this new
blade. We know you will like it too!
10yr CONDITIONAL WARRANTY TO ORIGINAL OWNER